The simplest idea of how to write a batch file is: Figure out how you would type the commands at a DOS prompt, then type them, one per line, in a text file — and you’ve written your batch file.
Commandline Arguements {%x}
Variables can be inserted into a batch structure in the form of command line arguements. These are in the form %1, %2, etc. To populate the variables, type the desired values after the batch file name when executing it.
DOS Environment Variable Names {%nn%}
DOS environment variables also can be used as variables in batch files. For example:
COPY %windir%\filename a:
Where does one get a list of DOS environment variables? I have never found a comprehensive list; but a partial but lengthy list of existing environment variables can be gotten by typing SET at a command prompt.
And here’s the really cool part! You can make them up as you go along, and assign them as you wish (as long as you don’t grab one that has a legitimate assigned value, such as, say, %windir%, the Windows directory name!). Pick a name, populate it with the SET command by any means known to you (including having one batch file run a process that includes setting one, and then another batch file using it), then use it by placing the name between flanking % signs. Environment variables remain until overwritten, or until a reboot. (If you set them in a DOS window, they will end when that session is closed.)
If you precede an environment variable setting with the SETLOCAL command (on a line of its own), then environment variable changes are local to the batch file. They do not exist for any other process and they do not survive the completion of the batch file’s execution. You can turn this setting off by issuing an ENDLOCAL command later in the batch file.
Silly example: To change the current logged drive to D:, do the following:
SET GONEXT=D:
%GONEXT%
More practical example: You want to copy a file to the desktop of each user the next time they log into Windows. Each user logs into a different user profile, and the Desktop folder is in a unique location for each user. (The folder name will, of course, vary on non-English versions of Windows.) For a file called MYFILE.TXT, you can do this as follows on Windows 2000 or XP computers by using an environment variable %userprofile% which gives the path to the root of a given user’s profile:
COPY MYFILE.TXT %userprofile%\Desktop
START Command
The START command can launch a Windows program either by specifying the program name (and its command-line parameters), or by specifying a data file name that is associated with a particular program (one that would automatically launch if you clicked on it in Windows).
For example, if you have NOTEPAD.EXE associated with all TXT files, then you could open the file SOME.TXT in any of the following four ways:
NOTEPAD SOME.TXT
SOME.TXT
START NOTEPAD.EXE SOME.TXT
START SOME.TXT
Why use one or the other? Well, sometimes you may have to use one particular form to get a result — depending, for example, on how the particular program is coded. Though the first form usually will work, you may want, for example, to write a more general batch file to open any particular program and associated file — without knowing what the requirements of all such files might be. You could, then, write a general batch file line such as START %1% %2%.
One particular use of the START command is to launch the default browser and go directly to a URL, for example: START http://google.com
You may use any of four command line parameters with the START command. These go after the word START, but before the program name:
/minimized or /m
/maximized or /max
/restored or /r
/wait or /w
The first three determine the screen status in which the program opens. The last one forces the batch file to halt processing until the called program has finished executing. (This can be useful, for example, if you are loading multiple items in your windows Startup folder, and the nature of the programs require that one be finished before the next starts loading. Put them all in a single batch file, using the /wait parameter, and only put a shortcut to the batch file in the Startup folder.) Command line parameters of the START command can be combined in a single line. Example:
START /max /wait NOTEPAD.EXE SOME.TXT
IF and IF NOT Commands
There are three variations of the IF and IF NOT commands.
* IF EXIST: Execute the commandline only if a particular file exists:
IF EXIST some.txt COPY c:/some.dll %windir%/SYSTEM/some.dll
* Compare two text strings, and execute the commandline only if they are identical.
IF %HostWinBootDrv%==C SET WinDir=C:\WINDOWS
* Error testing: Check the exit code of the most recently run program. If it is equal to or greater than the number specified, execute the command:
IF ERRORLEVEL 4 ERASE trashfile.tmp /P
GOTO Command
You can set a label in a batch file by beginning a line with a colon. You can then go directly to that label with the GOTO command. The GOTO command searches both forward and backward in the batch file; that is, it simply goes to the label location, regardless of where it is in the file.
For example, in my batch file for removing the Happy99 virus, UNHAPPY.BAT, the following code was used to make sure a file was not deleted unless the original form of it (backed up by the virus under the name WSOCK32.SKA) is present:
IF NOT EXIST WSOCK32.SKA GOTO SavedIt
DEL WSOCK32.DLL
RENAME WSOCK32.SKA WSOCK32.DLL
:SavedIt
FOR Command
The syntax for this command is: FOR variable in (set list) DO command
The variable must be in the form of one alphabetic character preceeded by %%; e.g., %%v.
NOTE: The %% is necessary because this is in a batch file which, otherwise, would give a special meaning to a single %. However, if you run the FOR command outside of a batch file, simply from the system prompt, just use a single % in the variable name. (Tip from Steve Wisdom)
The set list is enclosed within parentheses. These values will be assigned to the variable successively. You can use any text enclosed in quotes, batch file commandline parameters, environment variables, or DOS file wildcard expressions.
The command can be any valid command that otherwise could be entered into the batch file as a line of its own. example:
FOR %%D in (SYSTEM, COMMAND, SHELLNEW, “Start Menu”) DO DIR “%windir%\%%D” /W
More Information on These Commands
Each of these options (START, IF, GOTO, FOR) is an actual DOS command. At a system prompt, type the command name followed by /? to get further help on these items.
Note that there may be particular capabilities that show up in one version of Windows, but not in another. For example, though DOS per se may well be dead in Windows XP, the commandline functions people most often associate with DOS are not dead at all! (We just don’t call them “DOS commands” anymore; we call them “command prompt commands”. But they’re the same thing.) In some cases, these commands have been made more powerful in Windows XP. In particular, if Win XP Command Extensions are enabled, each of these four has very greatly enhanced capabilities (see Win XP Help & Support to learn about Command Extensions). Take advantage of the opportunity to explore each of them with the /? help flag.
SOME EXAMPLES (that don’t even require Command Extensions): START has new flags that let you set the priority (/LOW, /NORMAL, /HIGH, etc.) of the application you are launching. IF has an ELSE option than greatly expands its power, but which requires a somewhat complicated syntax sometimes (which the /? help text covers reasonably well).
Since these START, IF, GOTO, and FOR are actual OS commands, they can be used from a system prompt just like DIR, COPY, or any other DOS command. This means that they can be used outside of a batch file as well. There are small differences or issues that you can easily discover in use, and discussion of which would go beyond the purpose of the present page. For anyone comfortable working at a DOS system prompt, this should present no significant problem.
[ad#s-hr-strip]